Поиск

По наименованию | По типу

XCL-S900	цена:	руб.
поместить в избранное

The XCL-S900 digital video camera combines a very high resolution of 9MP with a high frame rate of 18fps (with fourchannel output), through its 1/1-type EXview HAD CCD II sensor, making it ideal for applications in the medical, semiconductor, solar and ITS industries where exceptional picture quality is required.

The XCL-S900 includes a host of superb features, including near-infrared sensitivity for low-light and NIR inspection applications, defect correction for simplified image processing, shading correction for reducing uneven image density and temperature readout for operation in variable conditions.

Near-infrared sensitivity for low-light and NIR inspection applications

Utilising Sony’s EXview HAD CCD II technology enables the camera to capture clear images in NIR (near-infrared) wavelengths. When used with an infrared strobe, each camera produces outstanding picture quality especially in low light and NIR inspection applications.

Defect correction for simplified image processing

The XCL-S600 can automatically minimise defective pixels (e.g., white and black dots) within the entire imaging area directly inside the camera. This feature helps simplify image processing.

Shading correction for reducing uneven image density

With embedded shading correction, the XCL-S600 minimises the uneven image intensity often caused by lighting and/or the lens. Its internal hardware processing reduces the need for external image correction. This reduces the processing load on the PC, and simplifies the processing task. In addition, the XCL-S600 is equipped with three lighting settings to capture clear images in varying conditions.

Temperature readout for operation in variable conditions

The XCL-S600 comes with an internal temperature sensor. The host device can receive temperature information by issuing a command, thus eliminating the need for a separate sensor and simplifying system configuration.

Sensitivity control for optimised image quality

The camera is equipped with a saturation signal control function to allow the saturation to be increased or decreased via software commands. For example, when capturing dark objects, the user can increase the amount of saturation signal charge, elevating the camera’s sensitivity to improve the picture quality instead of using a long exposure time.

Технические характеристики

Camera

Image Sensor	1/1-type progressive scan IT CCD
Image Sensor (Number of Effective Pixels, H x V)	3,388 x 2,712
Cell Size (H x V)	3.69 μm x 3.69 μm
Output Pixels (H x V)	3,384 x 2,704
Output Pixels (H x V, Full Resolution)	3,388 x 2,704
Frame Rate	18 fps (4ch) 9 fps (2ch) 5 fps (1ch)
Minimum Illumination (50%)	1.0 lx (Iris: F1.4, Gain: +18 dB, Shutter: 1/18 s)
Sensitivity	F8 (400 lx, Gain: 0 dB)
S/N Ratio	More than 50 dB
Gain	Auto, Manual : 0 dB to +18 dB
Shutter Speed	Auto, Manual : 2 s to 1/100,000 s

Camera Features

Readout Modes	Normal, Binning (2 x 1, 1 x 2, 2 x 2), Partial scan
Readout Features	Binarization, Gamma (variable), Built-in test pattern, LUT, 3 x 3 filter
Synchronization	Hardware trigger, Software trigger
Trigger Modes	Edge detection, Pulse width detection, Bulk trigger, Sequential trigger
Memory Channel (Usersets)	16 channels
User Memory	32 kbytes + 64 bytes x 16ch
Other Features	Shading correction, Defect correction, Temperature readout

Interface

Video Data Output	8, 10, 12-bit, digital
Digital Interface	LVDS
Camera Specification	CameraLink® Version1.2
Output Data Clock	4ch : --- (1 tap), 84 MHz (2 tap) 2ch : 84 MHz (1 tap), 42 MHz (2 tap) 1ch : 27 MHz (1 tap), 27 MHz (2 tap)
Digital Input/Output	IN (x2), OUT (x2), IN/OUT (x2)

General

Lens Mount	C mount
Power Requirements	DC +12 V (+10.5 V to +15.0 V)
Power Consumption	6.0 W (typical)
Operating Temperature	-10°C to +45°C 14°F to + 113°F
Performance Guarantee Temperature	0°C to 40°C 32°F to + 104°F
Storage Temperature	-30°C to +60°C -22°F to +140°F
Operating Humidity	20% to 80% (no condensation)
Storage Humidity	20% to 95% (no condensation)
Vibration Resistance	10 G (20 Hz to 200 Hz)
Shock Resistance	70 G
Dimensions (W X H X D)*	50 x 50 x 57.5 mm (excluding protrusions) 2 x 2 x 2 3/8 inches (excluding protrusions)
Mass	200 g 7.1 oz
Regulations	UL60950-1, FCC Class A, CSA C22.2-No.1, IC Class A Digital Device, CE : EN61326 (Class A), AS EMC: EN61326, VCCI Class A, KCC
Supplied Accessories	Lens mount cap (1) Operating instructions (1)
*	The values for dimensions are approximate.